Hummer Bike, 2003

Hummer Bike, 2003

 

Hummer Bike, 2003

Pagani Zonda C12-S Roadster, 2003

Pagani Zonda C12-S Roadster, 2003

The Pagani Zonda is a supercar made by Italian car maker Pagani. It debuted in 1999 and continues through the present, with production proceeding at roughly 25 cars per year. As of December, 2005, 60 Zondas had been built. It is a mid-engined 2-seat coupe and convertible. Construction is mainly of carbon fiber.

Some early Zonda engineering was done by Formula One champion, Juan Manuel Fangio. The car was originally to be named for him, the "Fangio F1", but the name was changed upon his death in 1995.

The Zonda is often compared to other supercars such as the Enzo Ferrari, the Koenigsegg CCR, the Lamborghini Murcielago and the Porsche Carrera GT.

1999 Zonda C12
The C12 debuted at the 1999 Geneva Motor Show. It was powered by a 6.0 L (5987 cc) Mercedes-Benz M120 V12 engine and could reach speeds of 185 mph (297 km/h). The engine produces 408 PS (300 kW/402 hp) at 5200 rpm and 421 ft·lbf (571 N·m) at 3800 rpm.

Just five of the original 6.0 L Zondas were built, though it was still available in 2002 when the C12 S debuted. One was used for crash testing, while another was a demonstrator and show car. The rest were delivered to customers over the next three years, priced at US$320,000.

The C12 could accelerate to 60 mph (97 km/h) in 4.2 seconds and hit 100 mph (161 km/h) in 8.2 seconds. Acceleration through the quarter mile was 12.1 seconds at 124 mph (200 km/h). Lateral acceleration on the skidpad was .93g, and the car could brake from 60 mph (97 km/h) in 110 ft (34 m).

1999 Zonda C12 S
The C12 S used a 7.0 L (7010 cc) AMG tuned version of the engine producing 550 PS (404 kW/543 hp). It can accelerate to 60 mph (97 km/h) in 3.7 s, to 100 mph in 9.5 s and complete the quarter mile in 11.9 s. Lateral acceleration on the skidpad is 0.98 g (9.6 m/s2). The car is 10 kg (22 lb) lighter than the normal Zonda C12. Top speed is 220 mph (354 km/h) for the coupe and 215 mph (346 km/h) for the roadster.

The C12 S features an elongated nose and flaps at the rear for improved aerodynamics. New light clusters and exhausts are also used. Fifteen 7.0 L C12 S cars were produced.

2002 Zonda C12 S 7.3
The 7.3 L (7291 cc) C12 S 7.3 of 2002 used one of the largest V12 engines ever made. The engine was designed and manufactued by Mercedes-Benz AMG. Traction control was added to handle the 555 PS (408 kW/547 hp) and 750 N·m (553 ft·lbf) that this engine produces. As of 2005, only five coupes out of an expected 100 have been produced.

A roadster version is also built, with production limited by the company to 40 examples. As of 2005, nine roadsters had been built. According to Road & Track magazine, three more C12 S 7.3 cars had been built as of June, 2005, but it is unclear whether they were roadsters or coupes. Motor Trend reported that 60 Zondas of all types had been built in their January 2006 issue.

2003 Zonda GR
Development of the Zonda GR started in December, 2002. At this stage the Zonda was nearly four years old, but had yet to be entered in major motorsports. Tom Weickardt, owner of American Viperacing, Toine Hezemans, owner of Carsport Holland, and Paul Kumpen, owner of GLPK, created a new company, Carsport Zonda, to build a racing version. They secured exclusive rights to develop, build and sell competition Zondas from Horacio Pagani, and the first GR was completed at Carsport's facility in Modena within months.

The Zonda GR is based on the Zonda C12 S. It was built on the same carbon fiber chassis, with tube frames in front and back. The bodywork was modified to include front and rear diffusers and louvers for improved aerodynamics. The car was 2 m (6.6 ft) wide, in accordance with the regulations of the FIA and ACO. The car's weight was reduced to 1100 kg (2425 lb), and a new suspension was designed. New wheels and brakes were also specified. The engine was equipped with an enlarged radiator, and the engine and gearbox also have new oil coolers.

The performance of the Zonda GR is well beyond that of the stock car. The car sprints from 0 to 60 mph (97 km/h) in 3.3 seconds and the engine produces around 600 PS (around 440 kW) at 5800 rpm and 580 ft·lbf (786 N·m) of torque at 4300 rpm with a redline increased to 7500 rpm. The added power and improved aerodynamics allow the car to hit 215 mph (346 km/h).

The Zonda C12 S Monza debuted at the 2004 Paris Motor Show as a track-day version of the Zonda for private use. Borrowing its appearance cues from the Zonda GR, the Monza included many features which could also be applied to other Zonda models. A dry sump engine tuned to more than 600 PS (more than 440 kW) was used, and the cooling was improved. Modified aerodynamics, including a different wing and front diffuser, allowed greater speed, as did optimized gearing. The car was lighter, with polycarbonate side windows, and an unmuffled exhaust is fitted. The revised interior includes different pedals, steering wheel, and seats, as well as a reinforced roll cage. Larger brakes and a stiffer suspension also improve performance. Finally, an external fire extinguisher is included for safety.

2005 Zonda F (C12 F)
The Zonda C12 F debuted at the 2005 Geneva Motor Show. It is the most extensive reengineering of the Pagani car yet, though it shares much with its predecessors including the 7.3 L V12. Power is increased to 602 PS (443 kW/594 hp) with a special clubsport model producing 650 PS (478 kW/641 hp). The company promises a 3.2 second sprint to 60 mph (97 km/h, a top speed over 350 km/h (218 mph) and it will be the queen in braking from 300 km/h to 0 (186 mph to 0). The Zonda F clubsport has a power to weight ratio of 521 bhp/ton (384 W/kg) . Compare, for example, the Enzo Ferrari which has a power to weight ratio of 483 bhp/ton (356 W/kg).

Production of the Zonda F will be limited to 25 cars, still not US compatible. The next model, due to be unveiled in 2008, will be fully EPA/DOT compatible.

The Zonda F, named after F1 pilot Juan Manuel Fangio, comes with an extra head light and different fog lights at the sides, new bodywork (revised front end, new rear spoiler, more aerodynamic vents all around) that improves the cars aerodynamics and different side mirrors. Further enhancements over the 'S' centre around optional carbon/ceramic brakes developed in conjuction with Brembo, magnesium wheels, inconel titanium exhaust system, hydroformed aluminium intake plenum and a redesigned 'Z preg' weave in the crash structure to improve rigidity and reduce weight.

Zonda Roadster F
The Zonda Roadster F debuted at the 2006 Geneva show. It is similar to the coupe, but with a removable carbon fibre roof and canvas side curtains weighing just 11 lb (5 kg). Production of the Roadster F is suggested at 25 units.

The Roadster F is able to maintain chassis rigidity without any gain in curb weight by eschewing conventional thinking by not strengthening the sills - a process which would have needed more than 35kg of reinforcement. Pagani instead uses racecar thinking, materials and construction techniques, strengthening the firewall structure of the chassis tub together with billet alloy braces that connect the points where the roof rails would have joined. The windscreen is also strengthened for safety reasons. These techniques enable the Roadster to have virtually the same weight as the coupe - 1230kg.

Peugeot 4002 Concept, 2003

Peugeot 4002 Concept 2003

Peugeot 4002 Concept 2003

Buick Park Avenue Ultra, 2003

Buick Park Avenue Ultra 2003

Buick Park Avenue Ultra 2003

The Park Avenue was Buick's flagship sedan. The Buick Park Avenue Ultra luxury sedan featured a more powerful 205-240 hp supercharged V6 that became standard in 1992 versus the regular 170-205 hp V6.

1997-2005
An updated Park Avenue was released in 1997. Riding on the Buick Riviera's G-body, it was stronger and more substantial than its predecessor. New generations of the 3800 engine continued as the only powerplant, and the Park Avenue continued with minor updates since this date. The Park Avenue was discontinued for 2006 and replaced by the Buick Lucerne. The Lucerne also replaces the nearly identical but smaller Buick LeSabre.

Prices for the Park Avenue was ranged from $34,705 for the regular Park Avenue and $39,225 for the Ultra luxury trim.

Buick Rendezvous, 2003

Buick Rendezvous 2003

The Buick Rendezvous, introduced in the spring of 2001 as a 2002 model year vehicle and produced through the present, is a sport utility vehicle produced by the Buick division of General Motors.

Background
Given the fact that the vast majority of SUVs were rarely taken off-pavement by their owners, much less driven under serious off-road conditions, a new type of car-based "crossover SUV" was developed that was hoped would provide all the elements that customers actually wanted from their SUVs such as cargo carrying capacity, elevated seating height and the suggestion of an active outdoor lifestyle with less of the negative attributes typically associated with traditional SUVs such as poor gas mileage, uncomfortable ride, high step-in height, propensity to roll over, etc. The formula of a car-based "soft-road" luxury SUV had proven marketable by the highly successful Lexus RX300 and was thought to be a promising new market category for Buick to exploit within this extremely profitable portion of the ever-expanding SUV category.

Technology and notable features
Buick's first truck in its lineup since 1923, the Rendezvous was billed as a combination of the best attributes of a minivan (large cargo capacity, seating for up to seven), a luxury automobile (ride, handling, smoothness) and a sport utility vehicle (truck styling and available all wheel drive).

The Rendezvous was produced at General Motors' Ramos Arizpe, Mexico assembly plant, where it shared an assembly line with the Pontiac Aztek.
Like the Pontiac Aztek, the Buick Rendezvous is based on a shortened version of GM's 2nd generation U platform minivans.

Buick benchmarked their Park Avenue luxury sedan as the prototypical target for ride and handling for the Rendezvous. In order to provide a luxurious and responsive car-like ride, all Rendezvous came equipped with a fully independent rear suspension system regardless of optional content or trim level.

The Rendezvous' instrument cluster detailing featured teal illuminated needles and numbers set in a silver face accented by chrome trim rings that was meant to evoke the luxurious look and feel of an expensive watch or designer bracelet.

The Rendezvous boasted the ability to carry seven passengers when equipped with a third-row bench, a class-leading feature that Buick brought to market before its competitors.
The Rendezvous is able to carry within its interior the proverbial 4'x 8' sheet of plywood, a common and useful task most of its competitors are unable to perform.

In support of the Rendezvous' intended role as a versatile accoutrement for busy, upper-middle class people with families, it provided a center console with storage space and power points for a laptop computer as well as a separate spots to hold a woman's purse, a cell phone, pager or other small items that the owner would want to keep organized and readily accessible as well as an optional rear cargo organizer system and rear seat stereo system controls with headsets.

On the uplevel CXL model, a driver information center on the instrument panel provided the outside temperature, compass functions, a trip computer that included readings of fuel economy, range and fuel used. An optional second generation heads-up display was also available.

An optional tire inflation monitoring system provided readings of tire pressure and warned if out of the specified range was a clever feature in the wake of the Ford Explorer/Firestone debacle that was in large part attributable to underinflated tires.

Smart Roadster, 2003

Smart Roadster, 2003

Smart Roadster
The Smart Roadster is a two-door microcar first introduced in 2003 by Smart GmbH. Unfortunately, sales of the Roadster and Roadster Coupé were far below expectations, resulting in a halt of production of both models in November 2005.

History
At the 1998 Paris Motor Show, the two-seat, 2.5-metre Smart City Coupe (later named Smart Fortwo) was launched. This was the beginning of a new car brand and one of the more radical vehicle concepts to hit the European market since the bubble cars of the 1950s. It was also the beginning of a difficult period for Smart. The City Coupe had stability problems that were uncovered only immediately prior to launch. These forced a package of alterations to be made that were both expensive and compromised the car’s handling, ride and gear shift. Public concerns over the car's stability, combined with Smart’s elitist marketing and the sheer radicality of the car’s design, proved damaging to initial sales. Production projections were slashed from 200k per year to 80k, close to disastrous for a new brand with just one product.

Design & Development
Under design director Jens Manske in autumn 1998, Smart's 14-strong design and engineering team began to sketch possible future Smart cars. They soon realised that the powertrain of the City Coupe was ideal for a small sports car, with a compact turbo engine driving the rear wheels via a sequential 6 speed gearbox.

Following Smart’s ‘reduce to the max’ philosophy and general innovative approach, a concept for a super compact, practical and pure sports car was generated. Two quarter-scale exterior and two quarter-scale interior models were made in February 1999 with Volker Leutz’s exterior and Christoph Machinek’s interior proposals selected for development into full-size development models. The design of the car had progressed considerably by the time Michael Mauer officially arrived from Mercedes Benz's Japan design center to take over Menske's position in May 1999. Mauer worked closely with the design team to quickly develop the roadster, with the intention now of producing a show car for the upcoming 1999 IAA motor show in Frankfurt.

By early 2000 the Smart City Coupe had finally started to gain sales momentum, with its cabrio version making a significant addition to total Smart sales. In March Mauer left Smart for Saab, succeeded by Hartmut Sinkwitz in May. As the third design director of Smart during the Roadster's development, Sinkwitz had to bring the concept to production in a very short time. This task may have been made somewhat easier by the Roadster having been designed from the start to use existing powertrain and other City Coupe components. Given some of the advanced design features, it is a credit to the design team that so much of the concept car made it to production.

Concept Car
The ‘Roadster Coupe’ as shown at the 2000 Paris motor show was already on its way to production form. It shared the design of the Roadster from the doors forward, but had a glass targa roof and rear structure resembling a very small estate (station wagon) in the same way as the BMW Z3 coupe and the Saab 9X concept car developed under Mauer at Saab a few years later.
Production versions of both Roadster and Roadster Coupe debuted together at the 2002 Paris Motor Show and were available to buy within a few months. Both cars were unique in the market, being significantly smaller that the Toyota MR2, MG TF, Fiat Barchetta and Mazda MX5, but offering similar performance and practicality to the base versions of these cars while significantly more fuel efficient.

Production
The Smart Roadster and Roadster Coupé were introduced in 2003, based on a stretched platform of the Fortwo (full length is 3427 mm). The two variants are meant to be reminiscent of the British roadster of yore, such as the Triumph Spitfire or the MG B. Both the Roadster and Roadster Coupé are available with a removable Targa roof or an electrical Softtop. The Roadster is powered by 45 or 60 kW (61 or 82 PS) versions of the turbocharged 3-cylinder engine in the rear, which is engineered by Mercedes Benz. The Roadster Coupé has only the more powerful 82 PS engine. A steering wheel with Formula 1-style gearpaddles, to control the semi-automatic sequential transmission, is optional. With weight as low as 790 kg, it is meant to provide the emotion of driving a sports car at an affordable cost. Still, the Roadster's price is not very far from that of a Fiat Barchetta or Mazda MX-5.

Both the Roadster and Roadster Coupé are available in Brabus-tuned versions with power increased to 74 kW (101 PS). The Brabus versions have a different twin sports exhaust, lower suspension, polished six-spoke aluminum alloy Monoblock VI 17" wheels, front spoiler, side skirts and radiator grille. Exclusive Brabus interior includes leather trimmed dashboard, alloy-effect accent parts, instrument graphics, leather/aluminium gearknob, aluminium handbrake handle, aluminium pedals and Brabus labeled floor mats.